9250

• 特征

  可與任何品牌的傳感器配合使用，滿足您的測量需求，獨立于制造商

  超快速按鈕配置

  支持 TEDS 自動識別傳感器

  通過總線控制器可擴展的現場總線接口

  結合現場總線控制器 9251 支持基于以太網的現場總線，例如 PROFINET、EtherCAT、EtherNet/lP

  多達 8 個儀表放大器可以級聯到一個現場總線控制器

  完整的測量數據導出功能

  適用于力、壓力、位移、轉速和扭矩測量，包括組合測量

  通過按鈕或 I/O 信號為每個 9250 放大器進行去皮設備

  每個放大器模塊最多兩個實時信號/限位開關

  通過 USB 端口使用 DigiVision PC 軟件進行多功能配置

  測量精度高

  控制柜安裝的節省空間設計

  可調截止頻率

  
  

• 產品數據

  Model	9250
  Non-linearity	< 0,005 % F.S.
  Sample rate	14400 Meas./s.
  Type of sensor	Strain gage Potentiometer DC/DC Incremental sensors
  Interfaces	Screw terminal
  Sensor excitation	Strain gage full bridge: 2,5 V 5 V 10 V configurable, short-circuit proof Potentiometer: 5 V
  Protection class	IP20
  Supply voltage	11 ... 30 V DC Galvanic separation Overvoltage Pole protection
  Specific characteristics	Ultra-fast pushbutton configuration Non-linearity < 0,005 % F.S. Outputs ±10 V, ±5V and 0 (4) - 20 mA 6 wire technique Automatic sensor recognition due to burster TEDS Adjustable cut-off frequencies Versatile configuration using DigiVision PC software via USB port

  
  

  
  

• 說明

  The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters.

  The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets. A highly accurate precision amplifier performs the amplification of the sensor signal being applied. The latest microprocessor technology made a 24 bit AD conversion with high accuracy possible. The sensor excitation is performed by the amplifier module itself so that no additional voltage source is required. It can also be set in steps of 2.5 V, 5 V, 10 V using configuration software DigiVision. The maximum feed current of 40 mA permits parallel connection of several strain gages sensors, e.g. for the addition of measurement variables. Measurement errors brought about by varying line lengths or due to temperature fluctuations effecting the sensor cable are avoided by having probe lines measuring the actual feed voltage directly on site at the sensor itself (6 wire technology). The cut-off frequency of the amplifier can be switched between 10 Hz and 1 kHz

  
  

• 產品介紹和下載

   9250_EN.pdf

  
  

  
  

• 附件

• 視頻

  
  

• 鏈接和CAD數據

相關產品

9236

9250